User's Manual

JadeOSUserManual9
Chapter3 CLI and System Management
JadeOS uses the command Line Interface (CLI) to implement the interaction between
users and the operating system. Users can complete a range of system configuration
and realize the management functions through the CLI.
This chapter describes CLI and system operations.
3.1 CLI Access
The console port on the equipment is Rj45 interface and located on the front panel of
each line card. You can connect to the CLI via the local console or SSH/TELNET to
obtain a remote console.
3.1.1 CLI Access via the Local Console
To connect to the CLI via the local console port, complete the following steps:
Step 1 Connect to the console port using the Rj45 cable and serial port cable.
Step 2 Configure your terminal emulation program (for example: SecureCRT) is con-
figured as shown in figure 3-1:
Figure 3-1 Console port connection settings
Step 3 Enter the user name and password:
(JadeOS)
User: admin
Password: admins
.
The prompt will be displayed as follows after logging in successfully.
(JadeOS) >