User's Manual

WIM1200-20 Configuration Manual
8
Figure 2-3
Figure 2-4
2.3.1 Revisible Wi-Fi Information
The revisible Wi-Fi information includes the SSID name, password and switch for
each SSID (if selected it is ON and otherwise OFF), any changes of it would take
effect on the 2.4G / 5G interfaces and their SSIDs at the same time.
Note: the definition of the first SSID of the checkbox is different from others. It is used
for hiding the SSID or not (once putting the cursor on the checkbox, there would be
“Broadcast/Hide” like figure 2-3. The definition of “Broadcast” is searchable for other
users and “Hide” means not, once hiding the SSID, it can only be connected by
manual input). While other checkbox means to open or close the SSID (once putting
the cursor on the checkbox, there would be “On/Off” as figure 2-4).
Input the new information, click “save” to submit the Wi-Fi configuration parameter.
The SSID name should no more than 32 characters, password should between 8-64
characters.
2.3.2 Default Wi-Fi Configuration
The default SSID amount: 3 SSIDs on 2.4G and 3 on 5G. The first SSID is ON, other
two are OFF in factory settings and they are available to open or edit by users if
necessary.