User's Manual

Table Of Contents

WIM1200-20 Configuration Manual

2 WEB Configuration

This chapter introduces the basic WEB configuration for WIM1200-20 including login

page, System Info, Wi-Fi Settings, Admin Password, Upgrade and Restart.

2.1 Page Login

After launching WIM1200-20 module, three SSID (AU-WIFI, AU-WIFI-1 and AU-WIFI-

2) would open and their password is the last 8 characters of the serial number on

module by default, which can be acquired in the label on it. Then SSID is searchable

and connected by Wi-Fi terminal device.

The module login page can be visited through http://192.168.1.1:8080/. See the

figure below.

Figure 2-1

Input the password “admin” and click “Enter” for the configuration page.

2.2 System Info

System Info is used for module information and network connection monitoring. See

the figure below.