User's Manual

WIM1200-20 Configuration Manual
9
Maximum connected user amount: 16 under each radio permission and 32 for the
overall unit.
Deafult SSID name: they are AU-WIFI, AU-WIFI-1 and AU-WIFI-2 for both 2.4G and
5G.
Default Wi-Fi password: the last 8 characters for all the SSID.
Default Cipher mode: wpa2-psk+ccmp
Default bandwidth rate limit: the utmost 1Mbps of uploading and downloading speed
for each SSID and user.
Default Wi-Fi mode: 802.11b\g\n mixed mode for 2.4G and 802.11a\n\ac mixed mode
for 5G.
Default Tx power: maximum
Default channel: automatic
Default country code: US
2.3.3 DHCP Server Configuration
The configurable DHCP address pool through DHCP Server ranges from 2-254.
2.4 Admin Password Change
For admin password changes, please see the figure below.
Figure 2-5
According to the note, input old password, new password, confirm password and
click “Save”.
2.5 Upgrade
The module supports for local upgrade and online upgrade, and when the module
cannot detect the new version for remote server, there would be only local upgrade
on the page. See the figure 2-6 below.