User's Manual
78JadeOSUserManual
Chapter11 Configuring SNMP
12.1 Configuring SNMP
Simple Network Management Protocol (SNMP) is an Internet-standard protocol for
managing devices on IP networks. It is used mostly in network management systems
to monitor network-attached devices for conditions that warrant administrative atten-
tion. JadeOS support versions 1, 2c, and 3 of SNMP. You can configure SNMP using
the following commands:
snmp-server community rw|ro <WORD>
snmp-server traphost <IP> <WORD> {udp-port portno}
Parameter Description
WORD Name of Community
udp-port port no
(optional) port number, default value: 162
IP IP address
Table 13- 1 Basic Parameters of SNMP
For example:
(JadeOS)#configure terminal
(JadeOS)(config)#snmp-server community ro ww 1.1.1.1