User's Manual

18JadeOSUserManual
(JadeOS)(config)#ntp trusted-key <key-id>
(JadeOS)(config)#ntp server <IP> iburst
Example of configuring NTP authentication
(JadeOS)(config)#ntp authenticate
(JadeOS)(config)#ntp authentication-key 1 md5 123
(JadeOS)(config)#ntp trusted-key 1
(JadeOS)(config)#ntp server 1.1.1.1 iburst
3.9 Ping and Traceroute
Command ping and traceroute can help to diagnose network connection status.
Command format:
ping A.B.C.D
traceroute A.B.C.D
For example, use command ping in enable mode to judge whether the internet con-
nection to IP address ‘192.168.20.1’ or not.
(JadeOS) #ping 192.168.20.1
Sending..., 100-byte ICMP Echos to 192.168.20.1, press 'q' or ESC to exit:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 0.686/0.7134/0.808 ms
3.10 License Management
License is mainly used to protect the lawful rights of authorized users. You can obtain
the authorization by input License Activation Key.
Note: please contact the vendors if you need to add APs after license is in effective.
To add License key, you can use following command in config mode:
license add <key>
Note: Key is provided by vendors, and the length is 192 characters.
After license key is in effective, you can inquiry the limit number of AP and station by
the following command:
show license limit
To display license key, you can use following command:
show license