User's Manual


40JadeOSUserManual
6.7.5 Configuring OSPF Network Type
JadeOS supports the following types of OSPF network:
• Point-to-point networks(HDLC, Token Ring, FDDI)
One point-to-point links such as HDLC and PPP, OSPF runs as a point-to-point net-
work type.
To configure an OSPF point-to-point network on JadeOS, use the following com-
mand:
(JadeOS)(config-if)#ip ospf network point-to-point
• Broadcast networks (Ethernet, Token Ring, FDDI)
On the broadcast medium such as Ethernet and Token Ring, OSPF runs as a broadcast
network type.
To configure an OSPF broadcast network on JadeOS, use the following command:
(JadeOS)(config-if)#ip ospf network broadcast
Note: The network type is broadcast by default in factory.
6.7.6 OSPF Point-to-point Configuration Example
In the following OSPF network, the autonomous system is divided into 3 areas.
JadeOS A and JadeOS B is the ABR which is responsible to announce the routes be-
tween OSPF areas.