User's Manual
24JadeOSUserManual
Tag will be encapsulated when sending data.
You can configure different services (for example, different authentication policies or
bandwidth control policies) on different inner tag when data received in QinQ
sub-interface.
4.7 Inquiring Interface Status and Statistics
To view interface information, use show interface gigabitethernet <Slot/Port>
command:
(JadeOS) #show interface gigabitethernet 12/0
Interface gigabitethernet 12/0
Hardware is Ethernet
Current HW addr: 04:8b:42:10:5c:00
Physical:04:8b:42:10:0c:18
index 23 metric 1 mtu 1500 duplex-half arp ageing timeout 300
tcp4mss disable tcp6mss disable
proxy_arp disable local_proxy_arp disable
(UP,BROADCAST,RUNNING,MULTICAST,TRUST)
VRF Binding: Not bound
inet 119.6.100.5/24 broadcast 119.6.100.255
inet6 fe80::68b:42ff:fe10:5c00/64
input packets 1779, bytes 117400, dropped 0, multicast packets 0
input errors 0, length 0, overrun 0, CRC 0, frame 0, fifo 0, missed 0
output packets 8, bytes 837, dropped 0
output errors 0, aborted 0, carrier 0, fifo 0, heartbeat 0, window 0
collisions 0
To view all interfaces information, use show ip interface brief command:
(JadeOS) #show ip interface brief
Interface IP-Address / IP-Netmask Status Protocol
loopback 0 unassigned / unassigned up down
Te 12/0 unassigned / unassigned up down
vlan 1 unassigned / unassigned up down
mgmt 1 192.168.20.95 / 255.255.255.0 up up
Gi 12/0 119.6.100.5 / 255.255.255.0 up up
Gi 12/2 172.50.3.1 / 255.255.255.0 up up
Gi 12/4 unassigned / unassigned down down
Gi 12/6 unassigned / unassigned down down
Gi 12/8 unassigned / unassigned up up
Gi 12/10 unassigned / unassigned down down
Gi 12/12 unassigned / unassigned down down