Data Sheet

PMS 250

Set

4 mm sliding sleeve system

Product PMS 250

description Sliding sleeve test equipment set for 4 mm system.

- Kleps 250

Contact-protected clamp-type test probe with rotating grip jaws and flexible

shaft to clamp wires and pins up to ø 4mm.

- PRUEF 2 S

Contact-protected test probe with slender stainless steel tip for penetration

of insulation and oxide layers.

- AK 2 B

Safety alligator clip for secure contacting of fine wires, clamping range up to

9,5 mm bolt diameter.

- MLB 100/1 V

Contact-protected measuring lead with 4 mm plugs and 4 mm sockets for

tower construction on both sides. Spring-loaded insulated sleeve is only

released by pressure on the side-mounted locking spring. (length:100 cm)

Please find further technical details on individual product data sheets.

Articlenummer 932827001

technical data

scope of delivery 1 x clamp-type test probe KLEPS 250 black (973 528-100)

1 x clamp type test probe KLEPS 250 red (973 528-100)

1 x test probe PRUEF 2 S black (973 659-100)

1 x test probe PRUEF 2 S red (973 659-100)

1 x alligator clip AK 2 B black (932 435-100)

1 x alligator clip AK 2 B red (932 435-100)

1 x measuring lead MLB 100/1 V black (973 646-100)

1 x measuring lead MLB 100/1 V red (973 646-100)

stand: 04.07.2018