Use and Care Guide

-15-
**,::690,:
- (5 ,?;,5:065 *69+ 0:
5,*,::(9@ ( *69+ >0;/
(+,8<(;,:0A,*65+<*;69:;/(; 0:*(7()3,
6-*(99@05.;/,*<99,5;5,*,::(9@-69@6<9
;663 4<:; ), <:,+ This will prevent
excessive voltage drop, loss of power or
overheating. Grounded tools must use 3-wire
extension cords that have 3-prong plugs and
receptacles.
!The smaller the gauge number, the
heav i er the cord.
 ' %! 
#!!!"!!
!
WARNING
* Blade
* Wrench
** Carrying bag
** Adjustable Rip Fence
** Non-marring overshoe
(*= standard equipment)
(**= optional accessories)
The Model SPT77WML-72 is equipped with a
“Twist Lock” male connector as shown (Fig. 16).
Use only a 3-wire extension cord which has a
mating “Twist Lock” female connector on one
end and a 3-prong grounding plug on the other
end. (See Electrical Safety section on page 2 for
grounding infor mation.)
!$ !! !"!

!$ &#!C!$ !D
!663E:
47,9,
(;05.
69+ 0A,05$
$09, 0A,:0544

3-6
6-8
8-10
10-12
12-16
18 16 16 14 0.75 0.75 1.5 2.5
18 16 14 12 0.75 1.0 2.5 4.0
18 16 14 12 0.75 1.0 2.5 4.0
16 16 14 12 1.0 2.5 4.0 —
14 12 —— ————
25 50 100 150 15 30 60 120
69+,5.;/05,,; 69+,5.;/05,;,9:
?;,5:06569+:
The use of any other acces so ries not specified in this manual may create a hazard.
!
WARNING

B
lades become dull even from cutting regular
lumber. If you find yourself forcing the saw
forward to cut instead of just guid ing it through
the cut, chances are the blade is dull or coated
with wood pitch.
When cleaning gum and wood pitch from
b
lade, unplug the saw and remove the blade.
Remember, blades are designed to cut, so
handle carefully. Wipe the blade with kerosene
or similar sol vent to remove the gum and pitch.
Unless you are experienced in sharpening
blades, we recommend you do not try.
FIG. 16
SM 1619X09207 9-14_SPT77WM WML 9/12/14 7:05 AM Page 15