Use and Care Manual
#!
1. Loosening/tightening blade bolt (1/2”
wrench)
2. Loosening/tightening brush caps (slotted
driver). See Fig. 8a.
#
Wrench storage is provided on the tool. Wrench
is fully seated when second lock detent is
engaged.
#8+4). 4++*9 :5 (+
/49+8:+* =/:.:.+ )588+):
58/+4:':/54/-( Damage to work piece
could occur if inserted incorrectly.
-11-
!
For a 0° cut, use right side of notch in the foot.
For 45° bevel cuts, use the left side (Fig. 7).
The cutting guide notch will give an
approximate line of cut. Make sample cuts in
scrap lumber to verify actual line of cut. This
will be helpful because of the number of
different blade types and thicknesses
available. To ensure minimum splintering on
the good side of the material to be cut, face
the good side down.
#
#.+4 9:'8:/4- :.+ :552
.52* /: =/:. (5:. .'4*9
The torque from the motor can cause the tool
to twist.
To turn tool “ON”, squeeze the trigger switch.
To turn the tool “OFF”, release the trigger
switch, which is spring loaded and will return
to the off position automatically.
Your saw should be running at full speed
BEFORE starting the cut, and turned off only
AFTER completing the cut. To increase switch
life, do not turn switch on and off while cutting.
!
Always hold the saw handle with one hand
and the auxiliary handle or housing with the
other.
2='?9(+9;8++/:.+8.'4*
*5+9 45: /4:+8,+8+ =/:. :.+
,8++35<+3+4:5,:.+25=+8-;'8*
Maintain a firm grip and operate the switch
with a decisive action. Never force the saw.
Use light and continuous pressure.
,:+8)5362+:/4-');:'4*
:.+ :8/--+8 .'9 (++4
8+2+'9+*(+'='8+5,:.+4+)+99'8?:/3+/:
:'1+9,58:.+(2'*+:5)53+:5')5362+:+
9:56*;8/4-)5'9:*5=4 5 45:'225=:.+
9'= :5 (8;9. '-'/49: ?5;8 2+- 58 9/*+
9/4)+ :.+25=+8 -;'8* /9 8+:8'):'(2+ /:
)5;2*)':).54?5;8)25:./4-'4*+>659+
:.+(2'*++'='8+5,:.+4+)+99'8?(2'*+
+>659;8+9:.':+>/9:/4(5:.:.+;66+8'4*
25=+8-;'8*'8+'9
FIG. 7
45°
BEVEL CUTS
0°
CUTS
!
WARNING
!
WARNING
!
WARNING
FIG. 8b
FIG. 8a
!
CAUTION
FOOT
BLADE
WRENCH
WEDGE
FEATURE
9/16”
WRENCH
1/2”
WRENCH
SLOTTED
DRIVER
SM 1619X08870_SPT67W 7/24/14 2:21 PM Page 11