User Manual

16
Accessories
Extension cords
If an extension cord is
necessary, a cord with
adequate size conductors that is capable
of carrying the current necessary for your
tool must be used. This will prevent exces-
sive voltage drop, loss of power or overheat-
ing. Grounded tools must use 3-wire extension
cords that have 3-prong plugs and recepta-
cles.
The GFCI supplied with
the tool may not guard
against electric shock from possible de-
fects or faults in an extension cord. If the
use of an extension cord is necessary, the ex-
tension cord must be plugged into a GFCI pro-
tected outlet.
RECOMMENDED SIZES OF EXTENSION
CORDS
120 VOLT ALTERNATING
CURRENT TOOLS
NOTE: The smaller the gauge number, the
higher the cord capacity.
Tool’s
Ampere
Rating
Cord Size in A.W.G. Wire Sizes in mm
2
Cord length in feet Cord length in Meters
25 50 100 150 15 30 60 120
3-6 18 16 16 14 0.75 0.75 1.5 2.5
6-8 18 16 14 12 0.75 1.0 2.5 4.0
8-10 18 16 14 12 0.75 1.0 2.5 4.0
10-12 16 16 14 12 1.0 2.5 4.0 —
12-16 14 12 — — — — — —
The use of any other accessories not specified in this manual may cre-
ate a hazard.
Store accessories in a dry and temperate environment to avoid corrosion and deteriora-
tion.
Included Accessories Optional Accessories
Wrench
Vacuum Hose Adapter
Water Feed Assembly
Quick-connect Hose Adapter
7” (178mm) Segmented diamond cut-off
wheel less than 3/8” (10mm) thick, having a
negative rake angle and no more than 3/8”
(10mm) gap between the segments.
1619X09633.indd 16 10/7/16 3:58 PM