Use and Care Guide

8
SYMBOLS (CONTINUED)
IMPORTANT:
Some of the following symbols may be used on your tool. Please study them
and learn their meaning. Proper interpretation of these symbols will allow you to operate the
tool better and more safely.
Symbol Name Designation/Explanation
V Volts Voltage (potential)
A Amperes Current
Hz Hertz Frequency (cycles per second)
W Watt Power
kg Kilograms Weight
min Minutes Time
s Seconds Time
Wh Watt-hours Battery capacity
Ah Ampere-Hours Battery capacity
Ø Diameter
Size of drill bits, grinding
wheels, etc.
n
0
No load speed Rotational speed, at no load
n Rated speed Maximum attainable speed
…/min
Revolutions or reciprocation per
minute
Revolutions, strokes, surface
speed, orbits, etc. per minute
IPX4 Ingress Protection Degree Protection from splashing water
Arrow Action in the direction of arrow
Alternating current
Type or a characteristic of
current
Direct current
Type or a characteristic of
current
Maintain Safety Devices
Do not open or remove safety
shields while the tool is running.
Look Behind While Backing
Look down and behind rst
to avoid tripping when pulling
back.
DANGER - Keep Bystanders
Away
Do not mow when children or
others are nearby.