Use and Care Guide

Fig. 17

Stabilizer 1

Stabilizer 2

Loosen

Fig. 18

Blade

Bolt

Outer Flange

Fan

Inner Flange

Installing the Blade

WARNING

Always protect your hands

by wearing heavy gloves or

wrapping the cutting edges with rags or other

materials when performing any maintenance

on the mower blade. Always remove the

battery pack when servicing or transporting the

mower.

NOTICE:

To re-install or replace the blade, be

sure to replace the parts exactly in the order in

which they were removed (Fig. 18).

1. Mount the inner ange to the fan (Fig. 19).

2. Mount the fan and the inner ange onto the

motor shaft with the fan blade towards the

deck (Fig. 20).

3. While wearing protective gloves, position the blade on the inner ange with the surface

marked “THIS SIDE FACING GRASS” facing toward the outside (Fig. 21).

Fig. 20

Inner Flange

Fan blade

Fig. 21

4. Align the outer ange with the shaft and assemble it in place.

5. Mount the bolt into the shaft and turn it clockwise by hand to pre-tighten it.

Fig. 19