Instruction manual

7
e) Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tool’s
operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
f) Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc.,
in accordance with these instructions, taking into
account the working conditions and the work to be
performed.Useofthepowertoolforoperationsdifferent
fromthoseintendedcouldresultinahazardoussituation.
5) BATTERY TOOL USE AND CARE
a) Recharge only with the charger specified by the
manufacturer.Achargerthatissuitableforonetypeof
batterypackmaycreateariskofrewhenusedwith
another battery pack.
b) Use power tools only with specifically designated
battery packs.Useofanyotherbatterypacksmay
createariskofinjuryandre.
c) When battery pack is not in use, keep it away from
other metal objects like paper clips, coins, keys,
nails, screws, or other small metal objects that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause
burns or a fire.
d) Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help. Liquid
ejectedfromthebatterymaycauseirritationorburns.
6) SERVICE
a) Have your power tool serviced by a qualified repair
person using only identical replacement parts. This
willensurethatthesafetyofthepowertoolis
maintained.
SAFETY INSTRUCTIONS FOR CORDLESS DRILL/
DRIVERS
• Avoiddamagethatcanbecausedbyscrews,nailsand
otherelementsinyourworkpiece;removethembefore
you start working
• Alwayscheckthatthesupplyvoltageisthesameasthe
voltageindicatedonthenameplateofthecharger
• Incaseofelectricalormechanicalmalfunction,
immediatelyswitchoffthetoolorunplugchargerfrom
power source
• SKILcanassureawlessfunctioningofthetoolonly
when the correct accessories are used which can be
obtainedfromyourSKILdealer
• Useonlyaccessorieswithanallowablespeedmatching
atleastthehighestno-loadspeedofthetool
• Thetool/chargerisnotintendedforusebypersons
(includingchildren)withreducedphysical,sensoryor
mentalcapabilities,orlackofexperienceand
knowledge,unlesstheyhavebeengivensupervisionor
instructionconcerninguseofthetool/chargerbya
personresponsiblefortheirsafety
• Ensurethatchildrendonotplaywiththetool/charger
• Secure the workpiece (a workpiece clamped with
clampingdevicesorinaviceisheldmoresecurelythan
by hand)
• Hold power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory or fastener may contact hidden wiring or
its own cord(cuttingaccessoryandfasteners
contactinga“live”wiremaymakeexposedmetalparts
ofthepowertool“live”andcouldgivetheoperatoran
electric shock)
• Use suitable detectors to find hidden utility lines or
call the local utility company for assistance (contact
with electric lines can lead to fire or electrical shock;
damaging a gas line can result in an explosion;
penetrating a water pipe will cause property damage or
an electrical shock)
• Do not work materials containing asbestos (asbestos
is considered carcinogenic)
• Dustfrommaterialsuchaspaintcontaininglead,some
woodspecies,mineralsandmetalmaybeharmful
(contactwithorinhalationofthedustmaycause
allergic reactions and/or respiratory diseases to the
operator or bystanders); wear a dust mask and work
with a dust extraction device when connectable
• Certainkindsofdustareclassiedascarcinogenic
(such as oak and beech dust) especially in conjunction
withadditivesforwoodconditioning;wear a dust
mask and work with a dust extraction device when
connectable
• Followthedust-relatednationalrequirementsforthe
materials you want to work with
• EnsurethatswitchB2 is in the middle (locking)
positionbeforemakinganyadjustmentsorchanging
accessories as well as when carrying or storing the tool
CHARGING/BATTERIES
• Chargebatteryonlywiththechargerthatissupplied
with the tool
• Donottouchthecontactsinthecharger
• Donotexposetool/charger/batterytorain
• Donotchargebatteryindamporwetenvironments
• Storetool/charger/batteryinlocationswhere
temperature will not exceed 40°C or drop below 0°C
• Donotusechargerwhendamaged;takeittooneofthe
ofciallyregisteredSKILServiceStationsforasafety
check
• Donotusechargerwhencordorplugisdamaged;cord
orplugshouldbereplacedimmediatelyatoneofthe
ofciallyregisteredSKILServiceStations
• Donotusebatterywhendamaged;itshouldbe
replaced immediately
• Donotdisassemblechargerorbattery
• Donotattempttorechargenon-rechargeablebatteries
with the charger
EXPLANATION OF SYMBOLS ON CHARGER/BATTERY
3Readtheinstructionmanualbeforeuse
4 Only use the charger indoors
5 Double insulation (no earth wire required)
6Donotdisposeofthechargertogetherwithhousehold
waste material
7Donotdisposeofthebatterytogetherwithhousehold
waste material