Use and Care Manual

16
Symbol Name Designation/Explanation
Direct current Type or a characteristic
of current
Alternating or Type or a characteristic
direct current of current
Class II construction Designates Double
Insulated Construction tools.
Earthing terminal Grounding terminal
Warning symbol Alerts user to
warning messages
Li-ion RBRC seal Designates Li-ion
program battery recycling
This symbol designates
that this tool is listed by
Underwriters Laboratories.
This symbol designates
that this tool is listed
by the Canadian
Standards Association.
This symbol designates that this
tool is listed to Canadian
Standards by Underwriters
Laboratories.
This symbol designates that
this tool is listed by
Underwriters Laboratories, and
listed to Canadian Standards
by Underwriters Laboratories.
SYMBOLS
IMPORTANT: Some of the following symbols may be
used on your tool. Please study them and learn their
meaning. Proper interpretation of these symbols will
allow you to operate the tool better and safer.
Symbol Name Designation/Explanation
V Volts Voltage (potential)
A Amperes Current
Hz Hertz Frequency
(cycles per second)
W Watt Power
kg Kilograms Weight
min Minutes Time
s Seconds Time
Diameter Size of drill bits,
grinding wheels, etc.
n
0
No load speed Rotational speed,
at no load
.../min Revolutions or Revolutions, strokes,
reciprocation per surface speed, orbits etc.
minute per minute
0 Off position Zero speed, zero torque...
1, 2, 3, ... Selector settings Speed, torque or
I, II, III, position settings.
Higher number means
greater speed
Infinitely variable Speed is increasing
selector with off from 0 setting
Arrow Action in the
direction of arrow
Alternating current Type or a characteristic
of current
0
15
SM 1619X05057 06-10:1619X05057 06-10 6/1/10 11:00 AM Page 15