Use and Care Manual

The Skil model 2350 Cordless Screwdriver/LED

Flashlight has a magnetic bit holder that accepts

any 1/4" hex bit. The low RPM capability of this

model is not a deficiency. On the contrary, low

speed means high torque and high torque is a

definite plus for efficient driving. The low speed

also provides more control to prevent stripout of

the screw and damage to the work surface.

FORWARD/REVERSE BUTTON

This button allows you to change the direction of

rotation of the tool. For clockwise or forward

rotation, push the button that has an arrow

pointing toward the bit. For reverse rotation

push the button that has an arrow pointing away

from the bit. The reverse position will provide

the counterclockwise rotation needed to remove

screws. To stop in either direction just release

the button (Fig. 1).

FLASHLIGHT ON/OFF BUTTON

This button allows you to activate the LED

flashlight.

When operating the LED flashlight, the

screwdriver function is disabled. The LED

flashlight must be in the off position in order to

activate the screwdriver. Conversely, the LED

flashlight will be disabled while operating the

screwdriver. The screwdriver must be in the off

position in order for the LED flashlight to function.

OPERATING INSTRUCTIONS

Model number 2350

Voltage rating 4 V MAX

No load speed n

180/min

Charger 2607225503

Charge time 3-6 hr

Collet capacity 1/4"

Screw Sizes 3/16" (5 mm)

MAGNETIC BIT

HOLDER

BIT

FIG. 2

FIG. 3

SM 1619X05057 06-10:1619X05057 06-10 6/1/10 11:01 AM Page 19