Specifications

8
MAINTENANCE/SERVICE
• This tool is not intended for professional use
• Beforemaintenancealwaysswitchofftool,ensure
thereisnowaterpressureintoolandhandgun,
disconnectplugfrompowersource,anddisconnect
toolfromwatersupply
• Always keep tool and cord clean (especially ventilation
slots S 2)
- do not use water, solvents or polishes
- regularly clean spraying nozzle G using cleaning
needle M 0 (remove spray lance K from hand gun L
rst)
• Regularly check for worn or damaged components and
have them repaired/replaced when necessary
• Cleaning water lter
- remove water lter E 2 from inlet connector C 2 with
long nose pliers
- rinse it clean and put it back (replace it when
damaged)
! neverusethetoolwithadamagedwaterfilter
• Storage !
- store the tool out of reach of children in a location
where the ambient temperature will not exceed 40°C
or drop below 0°C
- do not place other objects on top of the tool
- securely mount storage rail N on the wall with 4
screws (notsupplied) and horizontally leveled
- use storage rail N and storage straps P as illustrated
• If the tool should fail despite the care taken in
manufacturing and testing procedures, repair should be
carried out by an after-sales service centre for SKIL
power tools
- send the tool undismantled together with proof of
purchase to your dealer or the nearest SKIL service
station (addresses as well as the service diagram of
the tool are listed on www.skil.com)
TROUBLESHOOTING
• The following listing shows problem symptoms, possible
causes and corrective actions (if these do not identify
and correct the problem, contact your dealer or service
station)
! switchoffthetoolanddisconnecttheplugbefore
investigatingtheproblem
★ Spray is not consistent
- nozzle partly blocked -> clean nozzle
★ Motor does not start or stops suddenly
- power supply socket faulty -> use another socket
- plug not connected -> connect plug
- thermal protection switched o the motor -> let the tool
cool down for 5 minutes
★ Motor is running but spray is poor
- nozzle completely blocked -> clean nozzle
- water lter clogged -> clean water lter
- air in the pump -> ensure that water inlet connector is
securely tted
- inadequate water supply -> check that water tap is
fully open
ENVIRONMENT
• Donotdisposeofelectrictools,accessoriesand
packagingtogetherwithhouseholdwastematerial
(only for EU countries)
- in observance of European Directive 2002/96/EC on
waste of electric and electronic equipment and its
implementation in accordance with national law,
electric tools that have reached the end of their life
must be collected separately and returned to an
environmentally compatible recycling facility
- symbol @ will remind you of this when the need for
disposing occurs
DECLARATIONOFCONFORMITY
• We declare under our sole responsibility that this product
is in conformity with the following standards or
standardized documents: EN 60335, EN 61000,
EN 55014 in accordance with the provisions of the
directives 2006/95/EC, 2004/108/EC, 2006/42/EC,
2000/14/EC, 2011/65/EU
• Technicalfileat: SKIL Europe BV (PT-SEU/PJE),
4825 BD Breda, NL
¹ÊÁÂÆιÆ¼½ÊÇǾ¼½Æ
ȽʹÌÁÇÆËŵÆ¿Áƽ½ÊÁÆ¿
ÍÊÇȽƓˁ˅ʿ˂ʽ¼¹Ɠ
Ĺ¾ÁÂÿʹ¹¾
ÈÈÊÇιÄ¹Æ¹¿½Ê
25.07.2012 11
NOISE/VIBRATION
• Measured in accordance with EN 60704-1 the sound
pressure level of this tool is 81 dB(A) and the sound
power level 93 dB(A) (standard deviation: 2.2 dB), and
the vibration < 2.5 m/s² (hand-arm method; uncertainty
K = 1.5 m/s²)
• Measured in accordance with 2000/14/EC
(EN/ISO/3744) the guaranteed sound power level LWA is
lower than 97 dB(A)
• The vibration emission level has been measured in
accordance with a standardised test given in
EN/ISO/5349; it may be used to compare one tool with
another and as a preliminary assessment of exposure to
vibration when using the tool for the applications
mentioned
- using the tool for dierent applications, or with
dierent or poorly maintainted accessories, may
signicantly increase the exposure level
- the times when the tool is switched o or when it is
running but not actually doing the job, may signicantly
reduce the exposure level
! protectyourselfagainsttheeffectsofvibration
bymaintainingthetoolanditsaccessories,
keepingyourhandswarm,andorganizingyour
workpatterns