- Sea-Doo 2009 Jet Ski Operator's Guide

MAINTENANCE PROCEDURES
Ride Plate and Water Intake
Grate
Ride Plate and Water Intake Grate
Inspection
Inspect ride plate a nd jet pump water
intake grate for dam a ge. Have da m -
aged parts repaired.
WARNING
The DESS key should always be
remo ved from its post prior to in-
specting the intake grate.
F18J04Y
21
TYP ICAL — INS PECT THESE AREAS
1. Water intake
2. Ride plate
Ski/Wa keboard Pos t
(if s o equipp ed)
Ski/Wakeboard Post Inspection
Check ski/wa k eboa rd post opera tion.
Ensure it slides up a nd down easily.
Check locking mech an ism operat ion.
Check fasteners tightness. I f some-
thing is f ound defective, don't use
ski/wakeboard pos t and see an autho-
rized S ea -D oo d ealer for repair.
Ski/Wakeboard Post Lubrication
Lubricate ski/wakeboard post t hrough
all its length. Pull out then push in sev-
eral times to d istribute the lub ricant.
Body a nd Hull
Body and Hull Cleaning
Occasionally, wash the body with wa-
ter and soap (only use mild detergent).
Remove any marine organisms from
engine a nd/or hull. Appl y non- abrasive
waxsuchassiliconewax.
NO TICE
Never clean fiberglass
andplasticpartswithstrongdeter-
gent, degreasing agent, paint thin-
ner, ac etone, etc.
Stains may be remov ed from seat and
fiberglass with K night's S pra y -Nine
from K ork ay System Ltd or the equiva-
lent.
To clean the carpets , us e 3M™ Citrus
Base Cleaner (24 oz spay can) or the
equivalent.
Respect the env ironm ent by ensuring
fuel, oil or c leaning s olutions do not
drain into the w aterways.
WARNING
Periodically verify seat(s) lock pin
and tighten if needed. M ak e sure
seat(s) s ec urely lat ches .
92
______________