- Sea-Doo 2009 Jet Ski Operator's Guide

CONTROLS/INSTRUM EN TS/EQ UIPME NTS
smo2008-001-030_a
INF O RM ATION CENTE R GAUGE — VTS
POSITION IN D I C ATOR
1. Position indicator
2. Bow up
3. Bow down
4. Operating range (RXP models)
5. Operating range (other models)
High Performance VTS
RXP- X, R XT-X and WAK E M ode ls
Provides pre-set positions for quick
settings w hen adjusting watercraft
trim.
Two different trim position can be
recorded, one for each button.
The VTS system will c om par e t rim s et-
tings recorded , the highest trim setting
will be assigned to the upper button
(bow up), t he low est to the lower but-
ton (bow down).
If both trim positions are identical, both
buttons will have the same trim set-
tings.
Recordin g Trim Positions
1. Push both VTS buttons simultane-
ously.
smo2008-001-011_c
TO RE CORD
2. PRESET 1 w ill be displayed in i nfor-
mation center ga uge to indicate that
it is ready to record trim position .
smo2008-001-032_a
PRE SET 1 — READ Y TO REC O R D
3. A djust trim to the desired positi on
using VTS buttons.
4. Push both VTS buttons a ga in s imul-
taneously to rec ord trim position.
5. Then, PRESET 2 w ill be d isplayed in
information cente r gauge to i ndicat e
that it is ready to record a nother trim
position.
smo2008-001-032_b
PRE SET 2 — READ Y TO REC O R D
_______________
45