Users Manual

TRIG/PWR All CH
DBPE 103A-057-130 DBPE 103A-056-130
TRIG/PWR Analog In
1.EXT-DC-IN 1.CHANNEL 1
2.NC 2. CHANNEL 2
3.NC 3.NC
4.Digital Gnd 4. CHANNEL 4
5.EXT-TRIG-AUX 5. Analog Gnd
6.NC 6 CHANNEL 3
7.+5V-Tacho-Out
Fischer (FISCHER DBPE 103A-057-130)
(FISCHER DBPE 103A-056-130)
Compatible (FG8.1F1C.P07KS) (FG8.1F1C.P06KS)
CH1: BNC connector for the Analog input channel 1, AC/DC/ICP coupling
CH2: BNC connector for the Analog input channel 2, AC/DC/ICP coupling
CH3: BNC connector for the Analog input channel 3, AC/DC/ICP coupling
CH4: BNC connector for the Analog input channel 4, AC/DC/ICP coupling
All CH: 6 pin Fischer connector connecting to CH 1, 2, 3 and 4.
TRIG/PWR: 7 pin Fischer connector for connecting to an external triggering
source (usually a tachometer). This connector is also used for power supply.
USB: type A USB socket, providing a USB 3.1 connection to external devices.
Note: ICP® is a registered trademark of PCB Piezotronics Europe GmbH in Germany
and other countries.