User Manual

Connection Error Box

If an error box displays (Figure 2B), follow this procedure:

a. Ensure pump LCD is activated. See

Step 2 on page 4.

b. Check cable/adapter connections and

click Retry. If the error box displays

again, go to Step c.

c. Ensure the COM ports for the

adapter cable are numbered between

1 and 9. See changing the COM Port

box below.

Note: Another option in the error box is Ignore. Clicking Ignore opens the

SKC DataTrac Pump Manager window but only allows limited access to

so ware features.

Changing the COM Port

To change the COM port:

1. Ensure DataTrac adapter cable is connected to a USB port.

2. Click Start menu.

3. Right click on My Computer.

4. Select Manage.

5. Select Device Manager.

6. Expand the Ports (COM & LPT) menu.

7. Double-click to select USB Serial Port

(COM10 or similar).

8. Select Port Se ings.

9. Click on Advanced.

10. Select a COM port between 5 and 9 from

the COM Port Number dropdown menu.

11. Click OK to close.

12. Follow instructions for Connecting the

Pump to a PC (see page 4).

Figure 2B.

Connection error box

COM Port Window

DataTrac 2000 Setup