User Manual

3
Installation of Software Update (previous version exists on PC)
1. Close all applications.
2. Insert DataTrac So ware CD into CD-ROM drive. The CD is set up to autoplay.
If it does not autoplay on your PC, go to Step 2a.
a. Click Start bu on on tool bar.
b. Click on My Computer.
c. Double-click CD Drive.
d. Double-click Setup.exe.
3. The IS Welcome window will display.
a. Click Next.
4. The IS Program Maintenance window will display. Three options will appear:
• Modify - used to change se ings a er installation
• Repair - used to update previously installed so ware and to repair installation
errors
• Remove - used to remove the previously installed version of the so ware
from the hard drive (SKC recommended).
a. Click Remove.
b. Click Next.
c. The IS Remove the Program window will display.
d. Click Remove.
e. The IS Uninstalling AirChek 2000 window will display.
f. The IS Wizard Completed window will display, indicating successful
removal of the existing so ware.
g. Click Finish to exit the IS Wizard.
5. Follow instructions for Installation of New So ware.
Complete DataTrac 2000 So ware features are only available when an active
sample pump is connected to the PC (see Connecting the Pump to a PC). The
SKC DataTrac Pump Manager window may be accessed without a pump
connected to the PC; however, only limited features will be available (see
Connecting the Pump to a PC, Connection Error Box, Figure 2B on page 6).
DataTrac 2000 Setup