User Manual

Example of an AirChek 2000/3000 History File Printout:

History Display

The History Display (Figure 36)

shows the record or history of

all operations performed by the

connected pump. A history will

remain on screen and in pump

memory until it is cleared. If more

than 40 history operations have occurred since history was cleared, they will roll

over in memory so that the last 40 will be displayed. A history includes the following

data:

Figure 36. History Display

Pump Mode Operating State of the Pump

Flow ................................................. pump in constant ﬂ ow

Hold ................................................. pump in HOLD

Flow Fault ....................................... ﬂ ow fault occurred

Low Ba .......................................... ba ery depleted

Prog (Flow) ..................................... Pump in ﬂ ow mode while running a program

Prog (Hold) ..................................... Pump in Hold mode while running a program

Prog (Sleep) ..................................... Pump on Sleep mode while running a program

User Setup ......................................Pump’s user interface accesses and user adjusting pump

Flow Adjust ....................................Flow rate or ﬂ ow correction of pump adjusted by user

~ continued on page 32 ~

SKC Pump History Window