User guide

15
SKC Pump Scheduler Window
Time Bump Buttons
The Time Bump bu ons (Figure 24) add/subtract the selected time intervals to/from all program
Start and Stop times in the Pump Program Scheduler.
Time Interval
To select the time interval, click once on a time interval bu on.
Minus Button
To subtract the interval from all programs, click once on the - bu on.
Plus Button
To add the interval to all programs, click once on the + bu on.
Comm Checking Buttons
Attention! If programming more than one pump, turn Comm (Communication) Checking off by
clicking once on the Off bu on.
The Comm Checking bu ons (Figure 25) turn the communication checking function on or off . Comm Checking monitors
the interface cable connection with the pump. The default value is On. If the interface cable becomes detached, an error
message will display (Figure 26). Reconnect the pump and click once on Retry.
Turn Comm Checking off by clicking the Off bu on when programming multiple pumps. This will eliminate
the error message that displays each time the pump is disconnected.
When Comm Checking is turned off , the pump will enter Sleep mode fi ve minutes a er the last interaction
between the PC and the pump.
Figure 25. Comm Checking
Button
Figure 26.
Error Message
Figure 24.
Time Bump Buttons