User guide

SKC Pump Scheduler Window

Edit a Program

To edit a program displayed in the Pump Program Scheduler, click twice on it. This will remove it from the Pump

Program Scheduler and place it in the Program Edit Bar. Any program already in the Program Edit Bar will be erased.

FromPump Button

To display a Pump Program Schedule from a previously programmed pump, click once on the FromPump bu on

(Figure 12).

Time Bump Buttons

To increase or decrease all start and stop times of the programs in the Pump Program Scheduler, click once on the Time

Bump bu ons (Figure 24).

Save a Program

To save the Pump Program Scheduler as a program ﬁ le to a PC, select the Save command from the File menu.

The default extension .pgm is used to indicate Pump Scheduler ﬁ les.

Open Program

To open a previously stored program, select the Open command from the File menu.

Print Program

To print the Pump Program Scheduler displayed on the screen, select the Print command from the File menu.

Flow and Pressure Buttons

The C. Flow and C. Press bu ons (Figure 15) select pump mode (Constant Flow or Constant

Pressure). The New Flow and New Pressure bu ons set pump ﬂ ow and pressure rate (bu on

label changes to New Pressure when C. Press is selected).

Buttons Function

C. Flow ..................selects Constant Flow mode and enters Flow in the Mode cell of the

Program Edit Bar

C. Press .................selects Constant Pressure mode and enters Pressure in the Mode cell

of the Program Edit Bar

New Flow .............opens the Set Flow window (Figure 16). This option is only available when Constant Flow

mode is selected.

New Pressure ......opens the Constant Pressure window (Figure 17). This option is only available when Constant

Pressure mode is selected.

Set Flow Window

The Set Flow window (Figure 16) allows the user to select the ﬂ ow rate using the numbered ﬂ ow bu ons or using the

down and up bu ons. This window is only available when the pump is in Constant Flow mode.

Set Flow Rate

To set the ﬂ ow rate, click once on the desired ﬂ ow rate bu on. The new ﬂ ow rate

will appear in the display cell.

Up and Down

To decrease or increase the displayed rate, click the down and up bu ons.

Enter Flow Rate

To enter the displayed ﬂ ow rate into the Rate cell of the Program Edit Bar, click

once on the OK bu on.

Figure 16. Set Flow Window

Figure 15. Flow and

Pressure Buttons