User guide

8
Ordering Information
Description Cat. No.
IMPACT Samplers include fi lter cassette, calibration adapter, and rain cover, require
impaction substrate and collection fi lters below PM10
PM2.5
PM Coarse includes 2 fi lter cassettes
225-390
225-392
225-3911
SKC DPS System
§∞
**
∑
includes Leland Legacy Sample Pump with connection case,
charger (100-240 V), 2 external battery assemblies with adapters (packaged separately),
IMPACT Sampler, 2 fi lter cassettes, calibration adapter, rain cover, 25 disposable impaction
discs*, fi lter cassette opener, tubing with quick-connect fi tting, calibration tubing, and mount-
ing bracket, in a heavy-duty lockable carry case PM10
PM2.5
100-3901
100-3903
Recommended Collection Filters
‡
, required for each sample; select fi lters based on your applications
Quartz Filters, 47 mm, Tissuquartz
™
, 432 μm thick, pk/25 225-1823
PTFE Filters
#†
, 47 mm, 2.0 μm, with PMP support ring, pk/50 225-1747
Impaction Substrate for IMPACT Sampler,
required for each sample, select an impaction substrate based on
your application
Recommended to Reduce Particle Bounce
Impaction Discs*, 37 mm, pre-oiled, ready to use, disposable
pk/10
pk/25
pk/50
225-395B
225-395
225-395A
For Chemical Analysis of Larger Particles
Quartz Filters, 37 mm, Tissuquartz, 432 μm thick, pk/25 225-1822
PTFE Filters
#
, 37 mm, 2.0 μm, laminated PTFE support, pk/50 225-27-07
Accessories
PM Coarse Ring, adapts IMPACT PM10 to an IMPACT PM Coarse, includes fi lter cassette 225-3912
Mounting Bracket 225-399
Forceps, stainless steel 225-8371
Petri Dish Slides, for fi lter transport, pk/100 225-2-01
Glass Jars for Chemical Analysis pk/8
pk/36
225-8376
225-8377
Filter Cassette Opener 225-397
Replacement Parts
IMPACT Sampler Inlets 10 μm
2.5 μm
P54202
P54204
IMPACT Sampler Exhaust P21279
IMPACT Sampler Exhaust O-ring P31988
Rain Cover 225-398
Calibration Adapter 225-394
Filter Cassette 225-396
Stainless Steel Support 225-2647A
§ Quantity discounts available
∞ Provides data similar to data from Federal Reference Method samplers. The DPS System is not a U.S. EPA
reference or equivalent method for compliance sampling.
* Limited shelf-life
** DPS Systems with pumps contain Li-Ion ba eries and may be subject to special shipping regulations.
‡ Recommended fi lters for use with Leland Legacy Sample Pump
# Back pressure on PTFE fi lters can vary within the same lot.
† Maximum operating temperature is 464 F (240 C) based on the PMP support ring.
∑ Use in non-explosive environments only. Not UL Listed for intrinsic safety.
SKC Limited Warranty and Return Policy
SKC products are subject to the SKC Limited Warranty and Return Policy, which
provides SKC’s sole liability and the buyer’s exclusive remedy. To view the com-
plete SKC Limited Warranty and Return Policy, go to h p://www.skcinc.com/
warranty.asp.
Form #38010 Rev 1102