User's Manual

98
Mobile Phone Wireless Charging
Ⅰ
Sterilizer PHONE TOASTER

User Manual
3
Slowly lower the Sterilization/Charging Lever until a ‘click’ sound is
heard to fix it.
■
The mobile phone slot is closed, and then it starts to sterilize and charge wirelessly.
4
To stop during operation, press the Sterilization/Charging Lever
again until a ‘click’ sound is heard.
■
The Sterilization/Charging Lever is raised and the operation stops.
■
When the Sterilization/Charging Lever is down, the time does not change even if the
Timer Setting Bar is adjusted.
■
The product does not operate when the mobile phone slot is open, and it stops if the
mobile phone slot is opened during operation.
Checking the operation status
It is possible to check the operation status through the LED indicator on the front of the
product.
(Sterilization) LED (Wireless Charging) LED
■
Standby for sterilization: LED off
■
During sterilization: LED on (15 minutes)
■
Sterilization completed: LED off
■
Operation error: LED blinks (quickly)
■
Standby for charging: LED off
■
While charging: LED on
■
Charging completed: LED on
■
Operation error: LED blinks (quickly)
Sterilization/Wireless Charging
This product is a mobile phone sterilizer using UV-C LED. Not only sterilize the phone, but also
wirelessly charge it at the same time.
Check Before Use
■
Make sure if the product is powered.
■
Make sure if the Sterilization/Charging Lever is raised all the way.
■
Make sure if the inside of the product is empty.
1
Place the mobile phone horizontally in the slot with its front facing
forward.
2
Use the Timer Setting Bar to set the sterilization/wireless charging
time.
■
It is set to quick mode when the Timer Setting Bar is lowered to the bottom, and sterilization
proceeds for 5 minutes in quick mode.
■
Sterilization proceeds for 15 minutes in normal mode.
■
When the timer ends, the mobile phone comes up with the Sterilization/Charging Lever.