Phone Toaster 휴대전화 무선 충전 살균기 제품 사용설명서 한국어 English 日本語 www.aprilstone.com www.instagram.com/aprilstone_official 사용 전 "사용설명서"를 반드시 읽고 정확하게 사용하여 주세요. 제품의 사양 및 외관은 품질향상을 위하여 예고없이 변경될 수도 있습니다.
Mobile Phone Wireless ChargingⅠSterilizer Features Mobile Phone Sterilization by UV-C LED 6 UV-C LeDs are placed 360˚ to kill 99.9% of toxic bacteria from the mobile phone in 5 minutes. UV-C LeD with strong sterilizing power destroys the Dna of bacteria and viruses, and neutralizing them. Phone ToasTer is designed in a closed structure that blocks UV-C LeD, it is safe because the LeD will not operate if the phone slot is not closed.
Mobile Phone Wireless ChargingⅠSterilizer PHONE TOASTER User Manual Precautions for Safety Product Composition and Specifications This is to keep the user safe and prevent pr operty damage. Please read carefully before using the product and use it correctly. Please check the components and specifications before using the product, and use it correctly. Warning Product Composition Failure to observe the warnings may result in death or serious injury.
Mobile Phone Wireless ChargingⅠSterilizer PHONE TOASTER User Manual Part Names and Functions Front Side Top/Left/Back Sides 1 2 8 7 6 5 3 1 Number 23 Name Functions 1 Speaker Output the sound from a device connected via Bluetooth. 2 Volume Control Bar Adjust the volume of the Bluetooth speaker. 3 Timer Setting Bar Set the sterilization/charging time. Indicate Bluetooth, sterilization and wireless charging status.
Mobile Phone Wireless ChargingⅠSterilizer Sterilization/Wireless Charging PHONE TOASTER User Manual 3 Slowly lower the Sterilization/Charging Lever until a ‘click’ sound is heard to fix it. This product is a mobile phone sterilizer using UV-C LeD. not only sterilize the phone, but also wirelessly charge it at the same time. Check Before Use ■ Make sure if the product is powered. ■ Make sure if the Sterilization/Charging Lever is raised all the way. ■ Make sure if the inside of the product is empty.
Mobile Phone Wireless ChargingⅠSterilizer Using the Bluetooth Speaker 1 Turn on the Bluetooth Connection Switch. ■ In the pairing standby status, the (Bluetooth) LED blinks slowly. Select ‘PHONE TOASTER’ on the device to be connected. 2 ■ When pairing is complete, the (Bluetooth) LED on with a beep sound. ■ After initial connection, turn on the Bluetooth Connection Switch to automatically connect with the last paired device.
