User's Manual

will see the bottom of status bar ETH symbol

1. Tap Settings → Ethernet.

2. The device can automatically obtain IP address to

also choose to manually set the IP address to get conn

4. If the wireless network is not encrypted, in the pop-up window, select "Connect"

Start Connection;

5. If the wireless network is encrypted, enter the password in the pop-up window, and

click "Connect" Start Connection;

6. When internet connections are successful, the wireless connection icon in the

bottom status bar appears.

25 3G NETWORK

First of all you need to buy 3G wireless network card . The currently supported on the

3G card type please refer to 3G dongle support list or appendix.

We strongly recommend on buy the 3G Network Cards, in order to ensure normal 3G

Internet access. Please come to the prepaid card into the purchase of 3G Network Cards,

put the 3G network card insert into the USB host transfer cable and then insert device.

At this time it will be bright lights on the 3G network card, which indicated that it could

begin to connect the 3G network.

26 GPS

GPS functionality requires the use of a USB interface external GPS receiver. (It access

to device via the USB host transfer cable). Users need to download the navigation

software and map from the internet, through the SD card installation (please refer to the

Application Management section of this User Guide). The currently supported on the

GPS receiver type please refer to Appendix.

27 PPPoE SETTINGS

Before using this feature, connect the USB network card via the USB host transfer cable

access to device.

1. Tap Settings → PPPoE settings .

2. Input name and password then click connect to access the broadband network.

28 ETHERNET

Before using this feature, connect the USB network card via the USB host transfer cable

access to device. When the USB network cable plugged into the USB network card, you

appears

connect to the network. You can

ected.