Operation Manual

Operating Instructions
1. Inserting Micro SD Card
Note: Please choose branded Micro SD card and format it on computer before use.
Neutral cards are not guaranteed to work normally.
2. Installing and removing batteries
A Press on battery cap to open it.
B
Correctly install battery into camera as indicated by +/
- symbols and direction of
arrows marked on battery until it’s in place.
C Battery Gauge: Please refer to diagram.
D Remove Battery: Open cap to take battery out.
3. Charging
A Charging can be done by either connecting M10 to computer or power adaptor.
B Charge M10 on vehicle by connecting it to car charger.
C M10 can record video while charging (Switch into Vehicle-mounted Mode in
“Menu”
D Charging of M10 can be done even when it’s powered off.
4. Vehicle mounted video record
A. Firstly set up menu, and search vehicle- mounted mode in the menu, then power on
B. Plug in vehicle-mounted charger, and power on the vehicle, and the machine will
automatically start. switch off, the machine will automatically power off.
5. Switching camera on and off
A Press and hold power switch for 3 to 5 seconds to turn it on / off.