Outdoor Furniture We are a professional furniture provider with top-notch factories and outstanding designs, Our mission is to provide consumers with new lifestyles. By collecting consumer feedback, we constantly improve our products and create more choices for consumers. If you want to create your space, We are an ideal choice. Always.
In case of windy weather, please do not stand in the gazebo. Please do not stand under the gazebo in case of heavy snowfall. For safety, please use expansion screws to reinforce the posts to the ground. In windy weather, please tighten the fence and netting to avoid tearing in high winds. In extreme weather conditions, you can use a rope to pull the four corners of the gazebo to keep it stable. Please clear the snow off the roof in time for the heavy snowfall. Make sure all screws are tightened before use.
112PCS M4 8
M6x1 5 M5x1 5 ST 4.
1 10
2 2 2 2 3 11
4 2 2 4 5 C C1 C1 2 C 2 2 12
6 Q Q 2 12 4 7 U2 Q1 4 C/C1 4 13
8 12 9 12 14
10 P 4 U1 16 11 H 8 U 16 15
12 U3X8 C B1 H1X4 H1 H1 H1 H1 H1 4 U3 8 16
13 4 4 4 4 4 16 8 Notice:Repeat the above steps to connect the remaining 3 parts"D1" 3 parts"D2"and 3 parts"D" 14 S 1 V3 1 U 8 17
15 U 4 18
16 1.Connect the part"E3"and part"E2"with 2screws"U" 2.
17 The correct position of part"E1"and part"E"is shown in the gure below. Place part "E1"on both sides and part"E" in the rest of the positions E E E1 E1 E1 Place the two parts "V1" on the inside of the part "E1".
18 K E/E1 U U Y D K/K1 K1 K1 K 2 K1 2 Y 4 U 10 21
19 R 1 U 2 22
20 L1 4 M4 2 L2 4 23
21 Use 4 screws "U" to x the part "Y" in the four corners Fix the part "X"with 6 screws "U".
22 The correct part location is shown in the gure below.
24 The panel mounting method is as follows N5 J2 I1 M5 N5 M5 J2 I1 I1 J2 M5 N5 M5 I1 J2 N5 M5 4 N5 4 I1 4 4 J2 26
25 The positions of parts "F","F1" and "F2" are as follows. 26 Use 6 parts "X" and 6 screws "U" to x parts "F" and "F2". Use 4 parts "Y" and 4 screws "U" to x parts "F" and "F1".
27 Y1 z U c C1 B1 B B B1 c C1 B c Zx8 Zx8 Y1 Zx8 Zx8 B1 Zx6 B Zx6 Y1 Zx6 Zx6 Y1 4 U 8 Z 112 28
28 14 14 V2 W 4 W1 4 W2 1 V2 12 29
