Instructions / Assembly

6c. Attach top rail to balusters, feeding each baluster into
required slots. Start on one end and work towards the
other.
6d. In order to help temporarily secure the railing section
together, place a ratchet strap around the top and bottom
rail and tighten until snug. DO NOT OVERTIGHTEN AS
YOU CAN BEND THE RAILING.
Installing Railing Section to Posts
Lift secured railing section up, and CENTER this
section in between the spanned posts.
7a. Slide brackets over top & bottom rail ends before
setting rail in place. NOTE: To help stabilize railing
section use a quick grip clamp (or other type of clamp)
and clamp the first baluster to post sleeve.
(DO NOT OVERTIGHTEN CLAMP.)
7b. Install both bottom and top brackets on each side to
post using four #1-1/2" wood screws (provided). For
best results, set drill to low speed when installing these
screws：
(Refer to Screw Installation Guide “A”, including in the
Railing kit package)
Attach Post Caps
8. Secure post caps with
silicone or PVC adhesive.
NOTE: Clean up any excess
adhesive before drying.