Instructions / Assembly

 Stake out the fence posts, locating line, corner, end and gate posts.
 Mark the centers of the post locations for your fence style and gate using
dimensions from the Post Location Chart below
Post Location Chart
The following chart summarizes sizes and measurements for posts,
fence sections and gates.
Post Style
There are 3 styles of posts needed to complete your project (Fig.2&3).
Line Posts, Corner Posts and End Posts.(Use End Posts for Gate Posts).
Make sure you have the correct type and quantity of posts before
proceeding.
Step 2.Set posts
 Dig or auger post holes based on the dimensions in chart below. Ensure
the bottom of the post is set at exactly 24" below grade for the Ranch
Rail style. (Fig.4).
C
A
D
D
D
D
D
D
D
C
\
A