User Manual
22
DRAFT 2017-02-23
Pairing may take several seconds. The blue LED
indicates the pairing atus:
Pairing atus for our transmitters
ashing, then on
➧
Pairing has been completed successfully. Streaming
arts automatically. You can now use the transmitter.
ashing, then o
➧
Pairing was not successful. In this case, ensure that the
transmitter is within operating diance and try again.
You can also use the Smart Connect App for
pairing.
Further information:
■ If the transmitter is only temporarily (< 5 min) out of
operating diance, the transmission of the audio
signal is interrupted but automatically picked up again
when the transmitter is back within operating diance.
■ If a transmitter is already paired, you cannot pair it
again.
■ If you pair a third transmitter, the r paired
transmitter is automatically unpaired.