User Manual
21
DRAFT 2017-02-23
Pairing our transmitters
Each transmitter has to be paired once with
Smart Connect. You can use up to two of our transmitters.
Preconditions:
■ Smart Connect is turned on.
■ Neckloop is plugged into both sides, and
Smart Connect is worn around the neck.
■ Transmitter is within operating diance.
Pairing our transmitters:
XTurn on the transmitter.
XPress , and simultaneously until the
blue and green LEDs ash
. This takes
approximately 5 seconds.
Smart Connect searches for transmitters nearby.