User Manual

20
DRAFT 2017-02-23
Pairing 󰘵andard Bluetooth devices:
XPress and simultaneously until the blue LED
󰘱ashes
. This takes approximately 5 seconds.
Smart Connect searches for devices nearby.
XSet up your Bluetooth device to search for other
Bluetooth devices. Refer to the device's manual.
XOn the Bluetooth device, select "Smart Connect" from
the li󰘵 of detected devices.
XIf reque󰘵ed, enter the PIN "0000".
Pairing may take several seconds. The blue LED
indicates the pairing 󰘵atus:
Pairing 󰘵atus for 󰘵andard Bluetooth devices
󰘱ashing, then on for 5 seconds, then o󰘯
➧
Pairing has been completed successfully.
You can now use the Bluetooth device.
󰘱ashing, then o󰘯
➧
Pairing was not successful. In this case, ensure that the
Bluetooth device is within operating di󰘵ance and try again.
Tips:
■ You can also use the Smart Connect App for
pairing.
■ To cancel pairing, press shortly.
The blue LED goes o󰘯.