User Manual

11
DRAFT 2017-02-23
Pairing hearing in󰄋ruments with Smart Connect
Your hearing in󰘵ruments have to be paired once with
Smart Connect. After that, the connection is automatically
e󰘵ablished when your hearing in󰘵ruments and
Smart Connect are turned on.
Preconditions:
■ Both hearing in󰘵ruments are turned o󰘯 (the battery
compartments are open) and within operating
di󰘵ance.
■ Smart Connect is turned o󰘯.
■ Neckloop is plugged into both sides, and
Smart Connect is worn around the neck.
Pairing:
XPress until the green LED turns on .
This takes approximately 2 seconds.
Smart Connect searches for hearing in󰘵ruments
nearby
.
XTurn on the hearing in󰘵ruments while the green LED
is 󰘱ashing
: Close the battery compartment.
If you are wearing two hearing in󰘵ruments, both
in󰘵ruments mu󰘵 be turned on.