User Guide
Getting started 11
DRAFT
Pairing hearing instruments with easyTek
Your hearing instruments have to be paired once with
easyTek. After that, the connection is automatically
established when your hearing instruments and easyTek
are turned on.
Preconditions:
■ Both hearing instruments are turned off (the battery
compartments are open) and within operating
distance.
■ easyTek is turned off.
■ Neckloop is closed, easyTek is worn around the neck.
Pairing:
uPress until the green LED turns on . This
takes approximately 2 seconds.
easyTek searches for hearing instruments nearby
.
uTurn on the hearing instruments while the green LED is
ashing
: Close the battery compartment.
If you are wearing two hearing instruments, both
instruments must be turned on.