User's Manual

Connecting wireless programming system
and Bluetooth dongle
Turn the wireless programming system on X
by pressing the On / Off button.
When the Bluetooth symbol on the screen
of the wireless programming system stops
blinking, the Bluetooth dongle and the wire-
less programming system are connected.
Start the Connexx detection dialog via the button "De-
X
tect connected instruments" in the toolbar or on the
hearing instrument's task card.
Choose the wireless programming system as the detec-
X
tion device.
Follow the steps in Connexx to detect and program the
X
hearing instruments.
The wireless programming system will go into stand-
by mode after 15 min of inactivity.
Turn the wireless programming system back on by
X
pressing the On / Off button.
8
Working with the wireless programming system
When the hearing instruments and the wireless X
programming system are lying on the table, do not
exceed a distance of 5 cm (2 in) between hearing in-
struments and wireless programming system.
11