Operation Manual

LAN settings
This device provides some control functions including IP address management, and DHCP
server function.
IP Address You can change the IP address of this device, so it can become a
part of your local network. Please remember this address or you will
not be able to connect the configuration menu of device.
Default Gateway Please input the IP address of default gateway of your network here.
DHCP Server If you want to activate the DHCP server function of this device,
please select ‘Enabled’ in the ‘DHCP Server’ option, and see the next
Section for detailed instructions. If you don’t want to use the DHCP
server function of this device, or there’s another DHCP server on the
network this device connects to, please select ‘Disable’. After you
finish, please go to the bottom of this page and click ‘Apply’.
Lease Time Please choose a lease time (the duration that every computer can
keep a specific IP address) of every IP address assigned by this
access point from dropdown menu.
DHCP Start IP Please input the start IP address of the IP range.
DHCP End IP Please input the end IP address of the IP range.
Hostname If you wish, you can also optionally input the domain name for your
network. This is optional.
After you finish, please click ‘Apply’.