Operation Manual
Enable automatic firmware update: When enabled the router will periodically check if a new
firmware is available. If a new firmware is detected the router will give a notification.
Firmware Upgrade: This tool allows you to upgrade the Broadband router’s system firmware. To
upgrade the firmware of your Broadband router, you need to download the firmware file to
your local hard disk, and enter that file name and path in the appropriate field on this page. You
can also use the Browse button to find the firmware file on your PC.
Once you’ve selected the new firmware file, click Apply at the bottom of the screen to start the
upgrade process.
Backup Settings
The Backup screen allows you to save (Backup) the current configuration settings. When you
save the configuration setting (Backup) you can re-load the saved configuration into the router
through the Restore selection. If extreme problems occur you can use the Restore to Factory
Defaults selection, this will set all configurations to its original default settings (e.g. when you
first purchased the router).