Operation Manual

• SSID: This is the name of the wireless signal which is broadcasted. All the devices in
the same wireless LAN should have the same SSID.
• Channel: The channel used by the wireless LAN. All devices in the same wireless LAN
should use the same channel.
Guest Network
• Guest IP address: The gateway address for the Guest Network. This address cannot
be the same as the default router’s IP Address.
• Guest Subnet Mask: The Subnet Mask for the Guest network. This address cannot be
the same as the default router’s Subnet Mask.
• Guest Lease Time: One Week. In the Lease Time setting you can specify the time
period that the DHCP lends an IP address to your LAN clients. The DHCP will change
your LAN client’s IP address when this time threshold period is reached.
• Guest Start IP + End IP: You can select a particular IP address range for your DHCP
server to issue IP addresses to your LAN Clients. The default IP range is
192.168.169.100 ~ 192.168.169.200. This address pool cannot be the same as the
default router’s DHCP Address pool.
• Guest SSID: This is the name of the wireless signal which is broadcasted as the Guest
Network. This name cannot be the same as the default SSID.
Advanced Settings
This tab allows you to set the advanced wireless options. The options included are, Fragment
Threshold, RTS Threshold, Beacon Interval, and Preamble Type. You should not change these
parameters unless you know what effect the changes will have on the router.