Operation Manual

Please check www.sitecom.com for up to date drivers & utilities, manuals and support
7
3.1.2 Rear Panel
Port Description
POWER Power inlet
Modem
The port where you will connect your cable (or DSL)
modem or Ethernet router.
Port 1-4 The por
ts where you will connect networked computers
and other devices.
Reset
To reset system settings to factory defaults, press the
reset button for at least 4 seconds.
To reboot the device, press the reset button less than 4
seconds.
USB 1-2 The ports where you will connect USB devices