Operation Manual

Sitecom Wireless Network UMTS Router 54G WL-610
52
You can assign a single port number here or assign a range of port
numbers by assigning the first port number and the last port number
of the range. The two numbers are separated by a dash “-“, for
example “101-150” means from port number 100 to port number
150 – the range of 50 port numbers.
Traffic Type Select the traffic type of the packets that this rule will apply to. We list
some popular applications here to ease the configuration. You also
can get the same result by using other parameters, for example
source or destination port number, if you are familiar with the
application protocol.
Protocol Select the protocol type of the packets that this rule will apply to.
Apply Apply and exit the form.
Reset Clear the content of this form.