Operation Manual

Please check www.sitecom.com for up to date drivers & utilities, manuals and support
39
8.3 Access Control
If you want to restrict users from accessing certain Internet applications/services (e.g.
Internet websites, email, FTP etc.), then this is the place to set that configuration. Access
Control allows users to define the traffic type permitted in your LAN. You can control which PC
client can have access to these services.
Parameters Description
Deny If you select “Deny” then all PCs will be allowed to access
Internet accept for the PCs in the list below.
Allow If you select “Allow” then all PCs will be denied to access
Internet accept for the PCs in the list below.
Filter client PCs by IP Fill in “IP Filtering Table” to filter PC clients by IP.
Add PC You can click Add PC to add an access control rule for users by
IP addresses.
Remove PC If you want to remove some PC from the "IP Filtering Table",
select the PC you want to remove in the table and then click
"Delete Selected". If you want remove all PCs from the table,
just click "Delete All" button.
Filter client PC by MAC Check “Enable MAC Filtering” to enable MAC Filtering.
Add PC Fill in “Client PC MAC Address” and “Comment” of the PC that is