Operation Manual

25
Parameters Description
6.2.1 Dynamic IP address Your ISP will automatically give you an IP address
6.2.2 Static IP address Your ISP has given you an IP address already
6.2.3 PPPoE Your ISP requires PPPoE connection.
6.2.4 PPTP Your ISP requires you to use a Point-to-Point Tunneling
Protocol (PPTP) connection.
6.2.5 L2TP Your ISP requires L2TP connection.
6.2.6 Telstra Big Pond Your ISP requires Telstra Big Pond connection.
Once you have made a selection, click <More Configuration> at the bottom of the screen
and proceed to the manual’s relevant sub-section
6.2.1 Dynamic IP
Choose the Dynamic IP selection if your ISP will automatically give you an IP address. Some
ISP’s may also require that you fill in additional information such as Host Name, Domain
Name and MAC address. Your ISP may require a particular MAC address in order for you to
connect to the Internet. This MAC address is the PC’s MAC address that your ISP had
originally connected your Internet connection to. Type in this MAC address in this section or
use the “Clone MAC Address” button to replace the WAN MAC address with the MAC
address of that PC (you have to be using that PC for the Clone MAC Address button to work).
To find out the PC’s MAC address see Appendix A.
6.2.2 Static IP Address
Select Static IP address if your ISP has given you a specific IP address for you to use. Your
ISP should provide all the information required in this section.
6.2.3 PPPoE (PPP over Ethernet)
Select PPPoE if your ISP requires the PPPoE protocol to connect you to the Internet. Your ISP
should provide all the information required in this section.