Operation Manual

Basic Settings

Mode Allows you to set the AP to AP, Station, Bridge or WDS mode.

Band Allows you to set the AP fixed at 802.11b or 802.11g mode. You can

also select B+G mode to allow 80211b and 802.11g clients at the same time.

ESSID This is the name of the wireless signal which is broadcasted. All the

devices in the same wireless LAN should have the same ESSID.

Channel Number The channel used by the wireless LAN. All devices in the

same wireless LAN should use the same channel.

WLAN MAC This is the MAC address used by the Wireless interface of this AP

when it is in the station mode.

Clone MAC Click the “Clone MAC” button will copy the MAC address of your

PC,

that you are using to configure the AP, to the WLAN MAC.

MAC address If you want to bridge several networks together through the

wireless connection, you have to set this access point to “AP Bridge-Point to

Point mode”, “AP Bridge-Point to Multi-Point mode” or “AP Bridge-WDS

mode”. You have to enter the MAC addresses of the other access points