Operation Manual

Please check www.sitecom.com for up to date drivers & utilities, manuals and support
9
Power adapter 4 connections for wired PCs
Connection for your modem
Reset button
Figure 2-3 Setup of LAN and WAN connections for this product.
3.2.3 Setup WAN connection
Use a Ethernet cable to connect the WAN port to your ADSL/Cable modem. Figure 2-3
illustrates the WAN connection.
3.2.4 Power on
Connect the power-adapter to the power inlet port and connect it to a wall outlet, this
product will automatically enter the self-test phase. When it is in the self-test phase, the
Power LED will not be lighted for about 15 seconds, and then Power will flash 9 times to
indicate that the self-test operation has finished. Finally, power will be lit continuously to
indicate that this product is in normal operation.