Operation Manual

Please check www.sitecom.com for up to date drivers & utilities, manuals and support
57
10.4 Backup Settings
The Backup screen allows you to save (Backup) the router’s current configuration settings.
When you save the configuration setting (Backup) you can re-load the saved configuration
into the router through the Restore selection. If extreme problems occur you can use the
Restore to Factory Defaults selection, this will set all configurations to its original default
settings (e.g. when you first purchased the router).
Parameters Description
Configuration Tools Use the "Backup" tool to save the Broadband router current
configuration to a file named "config.bin" on your PC. You can then
use the "Restore" tool to restore the saved configuration to the
Broadband router. Alternatively, you can use the "Restore to
Factory Defaults" tool to force the Broadband router to perform a
power reset and restore the original factory settings.